manuals/manuals_Support_Center_Ion_20Rx_Rxcreditcard

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion Rx

Megatouch Ion Technical Reference Manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion Rx

Credit Card Reader Removal

1. Turn off and unplug the game.

2. Unlock the game, then open it by pulling the rear of the top bezel forward.

3. Remove the 4 screws securing the credit card reader to the top bezel (see Figure 1).

Note: To gain

better access to the bottom screw on the reader, it may be easier to remove the thumbscrew that
secures the monitor support arm to the monitor (see Figure 2). If you remove the thumbscrew from
the monitor support arm, be very careful not to strain the cables that run from the system to the
monitor.

THUMBSCREW
SECURING MONITOR
SUPPORT ARM TO
MONITOR

LOCATION OF BUTTON TO
RELEASE MONITOR
SUPPORT ARM

MONITOR

SUPPORT ARM

FIGURE 1 - REAR OF CREDIT CARD READER

FIGURE 2 - REAR VIEW OF MONITOR ASSEMBLY

4 SCREWS SECURING
CREDIT CARD READER

CREDIT CARD READER

CABLE CONNECTOR

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion Rx

Megatouch Ion Technical Reference Manual

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion Rx (cont’d)

Credit Card Reader Installation

4. Remove the credit card reader connector from the credit card reader and attach it to the new credit

card reader in the same place (see Figure 1).

5. Place the new credit card reader in the unit and secure with the same four screws you removed

from the old reader (see Figure 1). If you removed the thumbscrew from the monitor support arm,
replace it now (see Figure 2).

6. Press the button on the monitor support arm to release the arm (see Figure 2), then close and lock

the top bezel.

7. Plug in and turn on the game.

8. You can now test the credit card reader’s functionality by entering Operator Setup, pressing the

Credit Card

button, then pressing

Credit Card Functionality Test